The leading manufacturer of heatsinks, thermal conductive materials, cases and connectors.
Service hotline
MON-THR 7:30 - 15:45
FRI 7:30 - 15:15
E-mail service
1 - 12 (60)Number:
ksg_l_web.png

scope of delivery:
1 = 1 x upper shell; 2 = 1 x lower shell; 3 = 4 x M3 threaded sockets for PCB mounting; 4 = 4 x rubber feet

  • universal, lightweight plastic case made of 3 mm thick ABS in accordance with fire protection class UL94 V-0
  • grained surface for an attractive appearance
  • simple assembly by snapping the upper shell onto the lower shell
  • available in different colours
  • colours of the upper and lower shell can be combined with one another
  • pressed-in M3 threaded sockets for mounting circuit boards or mounting plates
  • delivery including non-slip rubber feet
  • optional fixing tab (L)
  • ventilation slots and individual production according to customer specifications
  • specific designs and printing on request
curve_web.jpg

Scope of delivery1 = 2 x case shell; 2 = 2 x cover plates; 3 = 2 x plastic frames; 4 = mounting material 

  • universal case consisting of aluminum profiles plugged against each other
  • elegant design with shockproof plastic frame and decorative strips with anti-slip properties
  • concealed screws through plastic design frame
  • lateral guide grooves for mounting 100 mm euroboards
  • integrated T-slots for mounting non-standardized PCBs or mounting panels
  • EMC-compatible design due to electrically conductive surfaces and seals on request
  • special productions and machinings, modifications and designs according to specification possible
  • other colours and surfaces on request
  • delivery as disassembled kit including cover panels and mounting material
rkl01.jpg
Case rear panel with integrated mounting rail
  • universal, massive case rear panel with integrated mounting rail made of aluminum
  • secure hold thanks to stable extruded profile with integrated wire form spring made of stainless steel
  • for all 35 mm mounting rails according to DIN EN 60 715 (formerly DIN EN 50 022) in rail material thicknesses from 1 to 2.3 mm
  • quick and simple mounting of the case to a mounting rail by snapping on directly
  • replaces a standard cover plate of the respective case
  • adapted to the respective case
  • the position of the mounting rail is always in the middle of the case
  • customer-specific machinings or special designs on request
  • a listing of all possible combination cases (KO …) is also available on the Internet. The table below only gives examples
kl35f2.jpg
  • universal, massive aluminium clamp mounting for all 35 mm mounting rails
  • suitable for rail material thicknesses from 1 to 2.3 mm according to DIN EN 60 715 (formerly DIN EN 50 022)
  • fast and easy mounting of heatsinks, casings etc. by direct snap up on the mounting rail
  • safe hold due to a stable extruded profile with integrated wire form spring made of stainless steel
  • special lengths (≥40mm), machinings and surfaces upon request
  • * = examples of mounting rail versions suitable for KL 35
rsp3rot.jpg
Shell cases for Raspberry Pi

contents of delivery: 1 = 1 x upper part; 2 = lower part; 3 = 2 x fixing straps (optional); 4 = mounting material; 5 = 1 x fixing of mounting rail (optional)
  • solid case made of 1,5 mm thick aluminium half shells designed for the single board computer Raspberry Pi
  • easy to install thanks to an easy screwing
  • ventilation slots in the upper and lower part for an improved heat transport
  • available in two heights for the mounting of e.g. several HAT modules (RSP … H …)
  • optional fixing straps for RSP 1, RSP 3 also fitting to VESA MIS-D 75 x 75
  • optional heat sink set including heat conducting foil WLFT 404 suitable for the corresponding variant of the Raspberry Pi
  • special machinings, further surfaces and colours (e. g. green (similar RAL 6032) and violet (similar RAL 4008)) upon request
sgk1.jpg
Shell cases with heatsinks

contents of delivery:

1 = heatsink; 2 = base plate3 = 2 x side panel (1 x left und 1 x right); 4 = mounting material;
5 = 2 x mounting bracket (optional)
  • universal cooling fin case made of extruded aluminium profile, two side panels and a base plate made of 1.5 mm aluminium
  • optimum heat dissipation due to large external cooling fins
  • for mounting 100 mm Eurocards, double Eurocards and non-standard PCBs
  • pressed-in threaded bushes on the inside for mounting a PCB or mounting panel
  • optional mounting brackets for wall and ceiling mounting
  • special designs, machining, surfaces and labelling possible according to your specifications
  • delivery as disassembled kit including mounting material
sgv_k.jpg
Variable shell case with heatsink - contents of delivery:
1 = heatsink (see table); 2 = base plate3 = 2x side panel (1x left und 1x right); 4 = mounting material;
5 = 2x mounting bracket (optional)

  • universal shell case with one extruded aluminium profile, two side panels and one base plate made of 2 mm aluminium
  • optimal heat dissipation due to chamfered cooling fins at the top
  • to house standard Eurocards as well as non-standard PCBs
  • threaded bushes pressed in on the inside for mounting a PCB or mounting plate
  • optional mounting brackets for wall and ceiling mounting
  • suitable for standard cooling profiles with min. 4 mm base thickness: e.g. SK 49, SK 58, SK 81, SK 118, SK 132, SK 133, SK 417, SK 421, SK 463, SK 505, SK 553, SK 629 ... etc. see f.cool
  • the cooling profiles can also be cut along the length of the fins, therefore the available widths are correspondingly variable
  • special designs, machining and labelling according to customer specifications
  • other surfaces and electrically conductive surfaces on request
et_web.jpg
Desing case EUROTAINER

contents of delivery: 1 = 1 x case upper shell; 2 = 1 x case lower shell; 3 = 2 x cover panels; 4 = side profile
5 = 4 x plastic frame (RAL 5014 pigeon blue); 6 = 16 x small standing feet (RAL 4002red violet); 8= mounting material 
  • multi-purpose aluminium case for 100 mm Eurocards with integrated guide slots with a modular spacing of 5,08 mm (1 HP)
  • horizontal and vertical connection possibility (stackable) due to a robust plastic frame
  • EMC compatible design achieved by electrical conductive surface treatment and additional conductive seals
  • insertion possibility for front foils or key pads
  • protection class IP54 achieved by use of seals
  • cover panels can be perforated or imprinted to your specifications, further surface treatments upon request
  • other surfaces upon request
tola.tif
contents of delivery:
1 = 1 x top shell; 2 = 1 x bottom shell; 3 = mounting material

  • universal, flexible and robust case made of 1 mm thick galvanised sheet steel
  • outer surfaces matt powder-coated, available in three standard colours
  • quick mounting of the top shell by means of a simple screw connection on the rear side
  • M3 threaded bushes pressed into the bottom shell for mounting a PCB or mounting plate
  • improved shielding against electromagnetic interference - suitable top-hat rail clamp KL 35 ... on request
  • optionally with ventilation slots on the top and bottom shells - also available as customised version "TOL SL ..."
gd.tif
  • versatile usable case with integrated guide slot for inserting non standardized components or PCBs
  • slide-in cover panel in various metal sheet thicknesses: 1.5/2 mm (GB 314)
  • optional cover plates with fixing straps for wall or ceiling mounting
  • integration possibility for front foils or foil keypads
  • special dimensions, treatments and surfaces possible according to your demand
gd.tif
  • versatile usable case with integrated guide slot for inserting non standardized components or PCBs
  • slide-in cover panel in various metal sheet thicknesses: 1.5/2 mm (GB 315)
  • optional cover plates with fixing straps for wall or ceiling mounting
  • integration possibility for front foils or foil keypads
  • special dimensions, treatments and surfaces possible according to your demand
ko_fr1web.eps
1 - 12 (60)Number:

Cookies